Aluminium Welding Wires

Product Details:

ER5183 is an aluminum filler metal containing higher levels of manganese, magnesium and chrome. ER5183 Is formulated to provide the highest possible “as-welded” strength in high magnesium alloys. Available in spools and cut length for MIG and TIG applications. ER5183 is known for its high fracture and impact toughness and exposure to corrosive elements. Applications include marine components, drilling rigs, cryogenics, etc. Base metals include 5083, 5086 and 5456 to similar base metals or to 5052, 5652 and 5056. Its melting range is 1075-1 180•F, its density Is 0.96 lbs/ci. The typical tensile strength is 41,000 psi and the post anodizing color is white.

Product Details:

ER5183 is an aluminum filler metal containing higher levels of manganese, magnesium and chrome. ER5183 Is formulated to provide the highest possible “as-welded” strength in high magnesium alloys. Available in spools and cut length for MIG and TIG applications. ER5183 is known for its high fracture and impact toughness and exposure to corrosive elements. Applications include marine components, drilling rigs, cryogenics, etc. Base metals include 5083, 5086 and 5456 to similar base metals or to 5052, 5652 and 5056. Its melting range is 1075-1 180•F, its density Is 0.96 lbs/ci. The typical tensile strength is 41,000 psi and the post anodizing color is white.

Product Details:

ER4043 is a 5% Silicon aluminum filler metal that is one of the most widely used aluminum welding alloys for fabrication and general repair in the aluminum welding industry. The smooth running ER4043 is often preferred because of its flowing characteristics and its reduced crack sensitivity over other aluminum welding wires. ER4043 is available in spools and cut lengths for both MIG and TIG welding and is recommended for base metals 3003, 3004,5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. ER4043 has a melting range of 1065-1170 Fand a density of .097 lbs/ci. Its post anodizing color is gray.

Product Details:

ER5356 is a 5% magnesium aluminum filler metal, available in spools and cut length for both MIG and TIG applications. ER5356 has increased levels of Mg, Ti and Mn along with the addition of chrome and a slight reduction in silicon. These changes work together to increase its corrosion resistance, making it the best aluminum for use in or near saltwater.ER5356 is commonly used on 5050, 5052, 5083, 5356, 5454 and 5456 and is the second most widely used aluminum filler metal. ER5356 has a melting range of 1060-1175F, a density of 0.96 lbs/ci and a typical tensile strength of 38,000 psi. Its post anodizing color is white.

Product Details:

ER4047 is an aluminum welding alloy with a 12% silicon content. Originally formulated for brazing, its features are high fluidity, narrow freeze range, low melting range and low shrinkage. ER4047 is a good general purpose, free flowing filler metal with good corrosion and hot cracking resistance when welded. It can also be used in sustained elevated temperatures. It comes in spools and cut length for MIG, TIG and brazing applications on 1060,1350, 3003, 3004, 3005,5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and711.0.ER4047 has a melting range of 1070- 1080° F and a density of 0.96 lbs/ci. Its typical tensile strength is 27, 500 psi and its post anodized color is gray-black.

Product Details:

ER4043 is a 5% Silicon aluminum filler metal that is one of the most widely used aluminum welding alloys for fabrication and general repair in the aluminum welding industry. The smooth running ER4043 is often preferred because of its flowing characteristics and its reduced crack sensitivity over other aluminum welding wires. ER4043 is available in spools and cut lengths for both MIG and TIG welding and is recommended for base metals 3003, 3004,5052, 6061, 6063 and casting alloys 43, 355, 356 and 214. ER4043 has a melting range of 1065-1170 Fand a density of .097 lbs/ci. Its post anodizing color is gray.

Product Details:

Product Details:

ER4047 is an aluminum welding alloy with a 12% silicon content. Originally formulated for brazing, its features are high fluidity, narrow freeze range, low melting range and low shrinkage. ER4047 is a good general purpose, free flowing filler metal with good corrosion and hot cracking resistance when welded. It can also be used in sustained elevated temperatures. It comes in spools and cut length for MIG, TIG and brazing applications on 1060,1350, 3003, 3004, 3005,5005, 5050, 6053, 6061, 6951, 7005 and cast alloys 710.0 and711.0.ER4047 has a melting range of 1070- 1080° F and a density of 0.96 lbs/ci. Its typical tensile strength is 27, 500 psi and its post anodized color is gray-black.